Lexmark Printer Test Page
Not sure if your Lexmark printer is actually printing cleanly? Run this free test page first — it checks alignment, color, and print head issues before you print anything that matters.
Run Your Lexmark Test Print
These are the same printable test pages used across the site, running entirely in your browser with nothing to install. Works with Lexmark MB, MX, and CX series.
Common Lexmark Print Issues This Catches
- Vertical streaks from a worn imaging unit on laser models
- Faded prints when toner is low but not yet reported by the device
- Alignment errors after firmware or driver updates
Not sure what a symptom like banding or streaking actually means for your printer? See our ink vs toner guide for how the same issue points to a different cause on inkjet vs laser models.
Why Run a Test Print First
The most common reason a big Lexmark print job goes wrong is one nobody checked with a test sheet first. See what misprints cost your office →
Lexmark Test Page FAQ
How do I print a test page on a Lexmark printer?
From the printer's control panel menu, go to Reports > Print Quality Test Pages, or select Print Test Page from the driver properties on your computer.
Why does my Lexmark printer print faded or streaky pages?
This is commonly a toner or imaging unit nearing end of life on Lexmark laser printers — a diagnostic test print will show if the fading is uniform (toner) or streaked (imaging unit).
Does this work with all Lexmark models?
Works with Lexmark MB, MX, and CX series, covering both inkjet and laser lines.
Or run the full pre-print check in one pass — alignment, color, margins, and nozzles included.
Try printerprinttest.com free