Green Printer Test Page
Run a free green printer test to check that one specific color channel — print it directly from your browser in seconds.
Green Test Print
Like red, green isn't a dedicated ink in a standard CMYK printer — it's built by overlapping cyan and yellow. This test page isolates that specific combination, which is useful because green problems tend to have a very different cause than a simple "green ink is low" explanation, since there's no such thing as green ink to begin with.
Standard CMYK printers don't carry green ink on its own — this color is built by overlaying cyan and yellow. See below for what that means when something looks off.
Before you print: open the print dialog (Ctrl/Cmd+P) and enable Background graphics under "More settings." Without it, browsers strip background colors by default and the blocks below will print blank.
Solid Green Block
Green Tint Gradient (100% → White)
Text Sharpness in Green
What This Reveals About Your Printer
A clean, even green block confirms cyan and yellow are both dispensing correctly and lining up where they should. A muddy, brownish, or overly dark green usually points to magenta contamination bleeding into the mix from a nearby clogged or leaking nozzle, since pure green shouldn't contain any magenta at all. A green that looks closer to teal or blue-green means the yellow layer is underpowered relative to cyan; a green that looks yellow-green or lime means the reverse. As with red, doubled edges or a slight halo around the block points to alignment, not ink.
Green Test Page FAQ
Is there a dedicated green ink cartridge in my printer?
No — standard CMYK printers don't carry green ink. Green is produced by overlapping cyan and yellow, the same way red comes from magenta and yellow.
Why does my green look muddy or brown instead of clean?
A muddy or brownish green usually means magenta is bleeding into the mix from a nearby nozzle issue — pure green from cyan and yellow shouldn't have any magenta tint in it at all. Check your magenta test page for clogs or contamination.
My green test looks fine, but green in real documents looks off. Why?
If the isolated green block prints clean, the cyan and yellow channels and their alignment are both working. A separate document looking off is more likely a source-file color profile issue (see our CMYK vs RGB guide) than anything about your printer's green output specifically.
Related
- Full Color Printer Test Page (all channels at once)
- Nozzle Check Test Page (per-color clog detection)
- CMYK vs RGB Explained — why screen and print colors never match exactly